Many Missouri homeowners with private wells notice that their water tastes a little off, leaves a film in the kettle, or lathers poorly compared with the water they remember from a city connection. Those signs often point to dissolved solids, a broad group of minerals and salts that move into groundwater as water passes through soil and rock. Two members of that group that homeowners ask about most are total dissolved solids and sulfate. This guide explains what they are, how they show up in a home, and how to test for them without guessing.
What Dissolved Solids Are
Total dissolved solids, often called TDS, is a combined measure of everything dissolved in water that passes through a fine filter. It includes calcium, magnesium, sodium, bicarbonate, chloride, and sulfate, along with other compounds. TDS does not tell you which substances are present or whether any one of them deserves attention. It is a starting point, not a diagnosis.
Sulfate is one of the specific ions included in that total. It occurs naturally in many bedrock and sediment layers, and it can also reach a shallow aquifer from surface sources. Because Missouri's geology changes a great deal from one county to the next, the water under a neighbor's property may look and taste different from the water under yours. Sulfate is usually tested on its own because it is one of the ions homeowners most often connect with a bitter taste.
Signs Homeowners Notice
- A bitter, salty, or mineral taste in drinking water or coffee.
- White crusting on faucet aerators, showerheads, and kettle elements.
- Soap that lathers poorly or leaves a film on dishes and skin.
- Spotting on fixtures that is not a reddish, brown, or black color typical of iron or manganese.
- Residue that builds up faster after the water heater runs.
Scale and film are useful clues, but they do not identify a specific substance. Keep notes on when the change started and whether it follows heavy rain, a pump repair, a change in household use, or a season.
How to Test for Dissolved Solids and Sulfate
A handheld TDS meter can give a rough reading that is useful for tracking change over time. It cannot identify sulfate or any single compound, and readings vary with water temperature and how well the meter is calibrated. Treat meter readings as a trend log rather than a final answer.
For a result you can rely on, use a laboratory that tests drinking water and follows its own collection instructions. Ask the lab which containers, preservatives, and sample volume it requires for each substance, since TDS and sulfate may be run on different bottles.
Collecting a Sample Step by Step
- Get the sample kit from the lab before you collect water, and read the instructions completely.
- Wash your hands, remove any faucet aerator or screen, and wipe the tap surface with a clean cloth.
- Let the cold water run until it has cleared the lines, unless the lab asks for a different approach.
- Fill the container without touching the inside of the lid or bottle, leaving any headspace the lab specifies.
- Label each bottle with the date, time, and tap location, and record whether the water was run before collection.
- Deliver or ship the sample within the time window the lab sets, keeping it cool if instructed.
Reading the Results
A lab report lists each substance, a measured result, and a reporting limit. Look for the collection date, the sample ID, and any note about quality control. Standards cited on a report are general reference points for drinking water. They are not a determination about your household, and a single result is a snapshot of one tap on one day.
What to Do Next
If results show high dissolved solids or sulfate, start by confirming the finding with a repeat sample collected the same way. Then consider how the water is used, including drinking, cooking, laundry, and garden watering. Any treatment decision depends on the full picture, including other minerals and the pump, pressure tank, and plumbing already in place. Check with a state or county resource or a qualified professional before buying equipment. This guide does not recommend any product.