A private well often comes with paperwork that nobody reads until a repair, a sale, or a new pump is on the table. The drilling record, sometimes called a well log, describes how the well was built and what the driller encountered underground. For a Missouri homeowner, that single page can answer questions about the casing, the pump, and the layers the drill passed through, which helps when a service provider or a testing lab asks what is already known.
Where a well record usually lives
Start with what came with the house. Records often sit in the closing folder, in a home inspection binder, or among the seller's maintenance notes. Then check the local and state side:
- The county recorder or county health office, which may hold a permit or notice tied to the property.
- State well records kept for Missouri wells, where a driller's completion report may be on file if the well was built under the state construction rules.
- The driller who built the well, if the business still operates, since many keep archived job files.
- Your own service records from earlier pump, pressure tank, or line work.
What a well log typically shows
A completion record usually lists the property location, the date of construction, the driller, and the method used. It may describe the materials and layers encountered, the casing installed, the screen or open section at the bottom, and a water level reading taken at the time. A later pump installation may appear on a separate form. Read these entries as history, not as a current test. Water conditions can shift over the years, and a log cannot tell you whether the water is suitable for use today.
Useful entries to look for include:
- The well location on the lot, relative to the house, the septic tank, and any livestock area.
- The casing material and whether the upper section was sealed with grout.
- The pump type and setting depth, if the record lists them.
- Notes on yield or water quality at the time of completion.
- The driller's name and license details, which help when you need a repair later.
When no record turns up
Many older wells predate complete filing, and some paperwork is lost during house sales. If you cannot find the record, work through these steps:
- Search the property file and closing papers for the words well, pump, or drilling.
- Ask neighbors on similar lots whether their records were located, since nearby wells may have been built by the same driller.
- Ask the state or county office whether a record exists under the parcel address or the prior owner's name.
- Inspect the wellhead for a tag, stamp, or metal plate that may carry a construction date or a driller mark.
- If nothing turns up, write down what you can see and note the gap in your own file.
Keeping your own copy
Once you find the record, scan it, store a copy with your other home papers, and note where the original is kept. Add later entries, such as pump replacements, pressure tank swaps, and repair dates, so the file keeps growing. A tidy folder helps anyone who services the system later and lets you compare what was built against what is installed now. Pair the file with a regular visual check of the wellhead and a water test scheduled around your household's needs, and keep the cap and surrounding area in good order while you gather papers.