When a home with a private well goes on the market in Missouri, buyers often ask different questions than they would about a home on a city main. Who drilled the well, how deep it goes, when the pump was last serviced, and whether the water has ever been tested are all reasonable questions. A homeowner who can answer them with paper rather than memory usually finds the process easier. This guide describes how to gather and organize those records. It is an independent reference, not a lender, appraiser, inspector, or installer, and it does not say what any record is worth or what a buyer should decide.
Start with the drilling record
Look for the well log or drilling report first. In Missouri, many well records are kept by state agencies, and some are held by the original driller or by the county. If you cannot find a copy in your closing folder, check with the previous owners, the county recorder, or the state well records office. Note the well location on the lot, the total depth, the casing details, and any static water level recorded at completion if it appears on the form. Keep a clean copy and a scan.
What to pull from the log
- The driller name and the date the well was completed
- The depth and casing material listed on the form
- The location sketch and the distances noted from the house or fixed landmarks
- Any pump setting or pitless adapter information
Gather the equipment history
Next, collect what you know about the pump, pressure tank, pressure switch, and any treatment equipment. Include photos of the make and model plates if you have them, but do not rely on a plate you cannot read. A simple list with the year each item was installed or last serviced helps a buyer and their inspector understand what they are looking at. If a contractor did a repair, keep the invoice and the written description of the work.
Water test results
Keep every water test report you have, including reports from a laboratory and results from a home kit. Each report should show the sample date, the parameters tested, the laboratory or method used, and the results. Keep reports in date order. A single older result tells a reader little on its own, so arrange them so the most recent sampling and any trend are easy to find. If you have never tested the water, say so plainly in your notes rather than leaving a gap that looks like a missing report.
Labeling sample reports
Write the collection date on the outside of each envelope or in the file name. Note the sampling point, such as the kitchen tap or an outside hose bib, so a reader knows where the water came from. Do not alter a result or write your own interpretation on a lab sheet.
Service and repair log
A simple log is the most useful single page you can add. For each entry, record the date, the work done, who did it, and any part replaced. Include disinfection events, filter changes, softener service, and pump visits. Entries do not need to be detailed, but they should be dated and honest. A gap is acceptable when you describe it, such as noting that no records exist before you bought the home.
Permits, inspections, and local notes
Some Missouri counties keep permit records for well work, and some parcels have septic or setback documents that sit near the well. If you have a septic system, include its records as well, since a reader will want to know where the drain field sits relative to the well. Ask the county planning or environmental office what records exist for your parcel. Describe what you find, and do not guess at what a document means if the wording is unclear.
Build the packet
Put the documents in a single folder with a one-page index at the front. Use the index to list each item, its date, and where the original is stored. Keep a second copy somewhere separate from the house, such as a cloud folder or a relative's file. Update the packet each time service is done, because a packet that stops at the closing date is less helpful than one that keeps going.
- Drilling record and location sketch
- Equipment list with service dates
- Water test reports in date order
- Service and repair log
- Permits, septic records, and county notes
- Index page with storage locations
What the packet does not do
A records packet does not certify that the water is safe, that the well will perform a certain way, or that any test passed. It shows what has been done and when. A licensed inspector or a qualified water professional can explain what the records mean for your situation. Missouri homeowners who want a fresh look at their water can arrange new sampling, and the packet makes that conversation easier to start.